2 products certified
IS 302 (Part 1)
This catalogue lists 2 products against IS 302 (Part 1), and every one of them takes the ISI or CRS route to certification, under the order S.O. 1739(E) recorded against this standard since 6 April 2026.
- Certification route
- ISI/CRS routes
- Recorded on all 2 rows
- Products covered
- 2
- Electrical Equipment
- Testing window
- 12 to 26 weeks
- Recorded on all 2 rows
Products under this standard
Each row carries its own HSN code and cost band, and opens its own page. Search by name or HSN code below.
Showing 10 of 2
What the cost figure covers
The figure above is the range this database records across the 2 products under this standard, from the lowest band to the highest. It is indicative, for planning, not a BIS fee.
| Component | Across these 2 products | What moves it |
|---|---|---|
| Laboratory testing | ₹20,617 to ₹1,07,472 | Differs by product, and is the only component here that does. |
| Application fee | ₹1,000 | Same on every one of the 2 rows. |
| Marking fee | ₹5,000 to ₹1,00,000 | Same range on every one of the 2 rows. Recorded annually. |
The application fee is the same on all 2 rows and the marking fee is recorded as the same range on every one of them, so the testing component is the only one whose recorded figures differ from product to product.
How certification works for this standard
Four stages a product goes through. The products under this standard are recorded under the ISI/CRS routes, and which one applies depends on the product. This page keeps the figures specific to IS 302 (Part 1); the general account is on the guide.
Your product is tested
A laboratory tests the product against IS 302 (Part 1). The testing band recorded here runs ₹20,617 to ₹1,07,472.
The application is filed
Filed on the ISI/CRS routes, under the order S.O. 1739(E) that makes these products mandatory. The application fee recorded is ₹1,000.
The licence is granted
The grant is for IS 302 (Part 1) specifically, which is why this page and the product pages that link back to it name the same number.
The mark goes on the product
The marking fee recorded is ₹5,000 to ₹1,00,000 and is recorded annually rather than once.
The step-by-step account, with documents and timelines, is on the BIS certification guide. This page keeps only what is specific to IS 302 (Part 1).
Laboratories that handle these categories
95 of the 416 laboratories in this directory carry one of the categories the products above sit in. 4 are below.
These are matched on category, not on the standard. This database records which categories a laboratory covers and not which laboratories are accredited for IS 302 (Part 1), so confirm that with the laboratory before you send samples.
- SWASTIK ELECTRONICS TESTING CENTRE (OPC) PVT. LTD., GHAZIABADGhaziabad
- Nemko India (Test Lab) Pvt. Ltd., FaridabadFaridabad
- Unique Test House LLP, MohaliMohali
- ELECTRONICS REGIONAL TEST LABORATORY (EAST) - ERTL (STQC), KolkataKolkata
Frequently asked questions
4 questions this page can answer from the records it holds. Each one is drawn from the same figures shown above.
What products are covered under IS 302 (Part 1)?+
This catalogue records 2 products against IS 302 (Part 1), across Electrical Equipment. Every one of them is listed below with its own HSN code and indicative cost, and each opens its own page.
What is the cost of IS 302 (Part 1) certification?+
The cost recorded across the products under IS 302 (Part 1) runs from ₹77,315 to ₹3,04,448. That is the range this database records from the lowest product band to the highest. It is indicative, for planning, not a BIS fee.
Why does the figure vary between products?+
The testing component is the one whose recorded figures differ from product to product: it runs from ₹20,617 to ₹1,07,472 across these 2 products. The application fee is ₹1,000 on every row here. The marking fee is recorded as the same range on every row here, ₹5,000 to ₹1,00,000. This record does not say which component produced any single band.
Which laboratories test products under IS 302 (Part 1)?+
This directory does not record which laboratories are accredited for a specific standard. 95 of the 416 laboratories here carry one of the categories the products under IS 302 (Part 1) sit in, so they are a reasonable place to start asking. Confirm IS 302 (Part 1) with the laboratory before you send samples.
Related standards
86 other standards share a product category with this one. These 6 carry the most products.
Need IS 302 (Part 1) certification?
Tell us what you make and we will tell you what it needs.
Get expert help